Training Surface Production System and Trouble Shooting

 

OBJECTIVES

After participate in this course, the participants will be able to:

1.      Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and trouble shooting in field application.

2.      Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.

3.      Analyze the production potential of reservoir under with actual handling system processes, trouble shooting  and to plan the better development processes according to reservoir capacity.

4.      Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes and trouble shooting of operation problems.

AUDIENCE

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

1.      Gas Surface Production Operation,  Equipments and Trouble Shooting
Introduction to Gas Handling and Facilities and Trouble Shooting

·         Gas Properties

-          Ideal gas

-          Real Gas

-          Gas Formation Volume Factor

-          Gas Compressibility

-          Gas-Water System

-          Gas-Condensate System

·         Gas Reservoir Performance

-          Reservoir Gas Flow

-          Gas Reserves

-          Well Completion Effect

-          Tight Gas Well

-          Gas Well Testing

·         Gas Piping System

-          Basic  Flow Equation

-          Flow in Wells and Flow in Pipelines

-          Effect of Liquids

-          Use of Pressure Traverse Curve

-          Liquid Removal from Gas Wells

-          Gas Piping System Trouble Shooting

·         Gas Compression

-          Type of Compressors

-          Compressor Design

-          Centrifugal Compressor

-          Gas Compressor Trouble Shooting

·         Total System Analysis

-          Tubing and Flow Line Effect

-          Separator Pressure Effect

-          Compressor Selection

·         Flow Measuring

-          Orifice Metering

-          Metering System Design

-          Other Metering Methods

-          Measurement Problem Trouble Shooting

·         Gas Condensate Reservoir

-          Well Testing and Sampling

-          Gas Cycling

·         Field Operation Problems

-          Pressure Cumulative Production Plot

-          Hydrate Formation

-          Sour Gas Production

-          Corrosion Control With Inhibitors

-          Sulfur Deposition

-          Field Operation Problem Shooting

·         Gas Processing

-          Field treatment of Natural Gas

-          Gas Plant Operation

-          Gas Dehydration

-          Gas Sweetening

-          Gas Processing Trouble Shooting

 

2.      Oil Surface Production Operation and Equipments
Oil Well Surface Production Equipment and Operation

·         Oil Well Equipment

-          Oil Well Production Operation

-          Well Automatic Safety Device

-          Oil Well Surface Production Problem Shooting

·         Oil Gathering System, Manifold and Flowline

-          Oil Gathering System

-          Manifold System

-          Flowline Sizing and Design

-          Oil Gathering System Problem Shooting

·         Crude Oil and Gas Separation

-          Separator and Principle of Separation

-          Design of Separator

-          Oil Dehydration

-          Crude Oil and Gas Separation Problem Shooting

·         Principles of Measurement

-          Introduction to Measurement

-          Crude Oil Measurement

-          Gas Measurement

·         Well Test

-          Introduction

-          Responsibility for Test

-          Preparation for Test

-          Types of Well Test

-          Equipment and Procedures

-          Accuracy of Fluid Measurement

-          Problem in Testing

-          Type of Test

·         Artificial Lift Method

-          Gas Lift

-          Submersible Pump

-          Sucker Rod Pump

-          Hydraulic Pump

-          Artificial Lift Problem Shooting

INSTRUKTUR

Team Konsultan PT Ganesha Inti Persada

WAKTU PELAKSANAAN

3 Hari (dimulai pukul: 09.00-16.00)

INVESTASI (Tidak termasuk biaya akomodasi & penginapan)

·         Rp. 11.000.000, - / peserta (Jakarta)

·         Rp. 11.000.000, - / peserta (Bandung)

·         Rp. 12.000.000, - / peserta (Yogyakarta)

·         Rp. 14.000.000, - / peserta (Bali)

·         Rp. 14.750.000, - / peserta (Lombok)

·         US$ 4780 / peserta (Malaysia)

FASILITAS

Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang

INFO & PROMO

021-22830080

 0811-996-1224 (WA)

CONTACT PERSON

0812-9679-1324

JADWAL TRAINING TAHUN 2024 :

November

  • 20-22 November 2024, Surabaya
  • 27-29 November 2024, Yogyakarta

Desember

  • 4-6 Desember 2024, Bandung
  • 11-13 Desember 2024, Medan/ Jakarta
  • 18-20 Desember 2024, Makassar/ Yogyakarta

Jadwal Online & OfflineTahun 2025:

Januari

  • 6-8 Januari 2025, Jakarta
  • 8-10 Januari 2025, Bandung
  • 13-15 Januari 2025, Yogyakarta
  • 22-24 Januari 2025, Bali

Februari

  • 3-5 Januari 2025, Yogyakarta
  • 10-12 Januari 2025, Bandung
  • 17-19 Januari 2025, Batam
  • 24-26 Januari 2025, Jakarta

Maret

  • 3-5 Maret 2025, Malang
  • 10-12 Maret 2025, Bandung
  • 17-19 Maret 2025, Jakarta
  • 24-26 Maret 2025, Yogyakarta

April

  • 9-11 April 2025, Bandung
  • 14-16 April 2025, Jakarta
  • 23-25 April 2025, Yogyakarta
  • 28-30 April 2025, Surabaya

Mei

  • 5-7 Mei 2025, Jakarta
  • 13-15 Mei 2025, Yogyakarta
  • 21-23 Mei 2025, Lombok
  • 26-28 Mei 2025, Malang

Juni

  • 4-6 Juni 2025, Jakarta
  • 11-13 Juni 2025, Yogyakarta
  • 18-20 Juni 2025, Bandung
  • 24-26 Juni 2025, Bali

Juli

  • 2-4 Juli 2025, Bandung
  • 9-11 Juli 2025, Jakarta
  • 16-18 Juli 2025, Lombok
  • 23-25 Juli 2025, Yogyakarta
  • 29-31 Juli 2025, Medan

Agustus

  • 6-8 Agustus 2025, Bandung
  • 13-15 Agustus 2025, Jakarta
  • 20-22 Agustus 2025, Malang
  • 27-29 Agustus 2025, Bali

September

  • 1-3 September 2025, Bandung
  • 10-12 September 2025, Surabaya
  • 17-19 September 2025, Jakarta
  • 22-24 September 2025, Lombok

Oktober

  • 1-3 Oktober 2025, Yogyakarta
  • 8-10 Oktober 2025, Jakarta
  • 15-17 Oktober 2025, Bandung
  • 22-24 Oktober 2025, Bali

November

  • 3-5 November 2025, Lombok
  • 10-12 November 2025, Jakarta
  • 17-19 November 2025, Bandung
  • 24-26 November 2025, Malang

Desember

  • 3-5 Desember 2025, Jakarta
  • 10-12 Desember 2025, Bandung
  • 17-19 Desember 2025, Surabaya
  • 22-24 Desember 2025, Yogyakarta

Iso_14001.jpg

ADMIN LOGIN

KLIEN KAMI