Pengelolaan Lapangan Mature, Teknik & Strategi Meningkatkan Produksi

 

LATAR BELAKANG

Setelah menyelesaikan training ini peserta diharap mampu:

1. Memiliki prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak gas dilaksanakan, pengembangan pelaksanaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature
2. Melakukan diagnosis sederhana dan mengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
3. Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi, melakukan peramalan kinerja dan merencanakan pengembangan
   operasi produksi lapangan mature.
4. Melakukan perhitungan kuantitatif sederhana dari seluruh data perolehan data ubing, flowline, choke, perforasi, gravel-pack, sub-surface safety valve pada sumuran, merencanakan pengembangannya dengan memperhitungkan kemampuan masing-masing sumuran pada lapangan mature.
5. Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti; pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
6. Memahami prinsip-prinsip dasar perancangan; penyemenan, orkover, stimulasi sumuran dengan pengasaman dan perekahan hidrolik, perencanaan workover dan lain-lain untuk lapangan mature.

MATERI TRAINING

Geologic Consideration in Producing Operation

• Introduction
• Sandstone reservoir
• Geologic factors affecting reservoir properties in sandstone
• Application of geologic concepts in specific sandstone
• Carbonate reservoir
• Application of geologic concepts in carbonate reservoir

Reservoir Consideration in Well Completions

• Introduction
• Hydrocarbon properties of oil & gas
• Recommendations of obtaining good test data
• Eyeball interpretation of pressure charts

Well Completion Design

• Factors influencing well completion design
• Conventional tubular configuration
• Unconventional tubular configuration
• Sizing production tubular
• Completion interval
• Permanent well completion (PWC)
• Tubingless completion

Tubing String, Packers, Subsurface Control Equipment

• Tubing string
• Steel grades
• Tubing connections
• Make up of API threaded connection
• Design of tubing strings
• High strength tubing
• Physical properties of steel
• Sensitivities of high strength tubing
• Tubing inspection
• Tubing handling practices
• Equipment for use with strength tubing
• Tubing running practices
• API publication list
• Packers and subsurface control equipment
• Production packers
• Subsurface control equipment

Perforating Oil & Gas Wells

• Introduction
• Types of perforators
• Evaluation of perforator performance
• Factors affecting gun perforating result
• Perforating in a clean fluid with differential pressure into wellbore
• A comparison between the GEO-VANN system and other perforating methods in wells equipped with packers

Completion and Workover Fluids

•  Functions-requirements-selection criteria
• Formation damage related to solid
• Oil fluid-practical application
• Conventional water-base mud
• Oil base or invert-emulsion muds
• Foam
• Perforating fluids
• Packer fluids
• Well killing

Production Logging

•  Introduction
• Logging device
• Application of production logging
• Fields examples of production logging techniques
• Primary cement evaluation

Problem Well Analysis

• Problem wells
• Problem well analysis checklist

Paraffin and Asphaltene

• Introduction
• Paraffin and asphaltene chemistry
• Deposition mechanism
• Removal of wax deposits
• Preventing or decreasing wax deposition
• Design of wax control

Squeeze Cementing  - Remedial Cementing

• Introduction
• Theoretical considerations
• Practical considerations
• Special squeeze cementing situations
• Planning a squeeze cement job
• Normal operational procedures
• Other operational procedures
• Plug-back operations
• Special cement system

Sand Control

• Introduction
• Reduction of drag force
• Mechanical methods of sand control
• Practical considerations in gravel packing
• Use of screen without gravel
• Resin consolidation methods

Formation Damage

• Introduction
• Basic causes of damage
• Classification of damage mechanism
• Reduced absolute permeability
• Increased fluid viscosity (emulsion)
• Diagnosis of formation damage

Surfactants for Well Treatments

• Characteristics of surfactants
• Use and action of surfactants
• Formation damage susceptible to surfactant treatment
• Preventing or removing damage
• Well stimulation with surfactants
• Increasing effectiveness of rod pumping
• Prevention of well damage

Acidizng

• Acids used in well stimulation
• Acid additives
• Carbonate acidizing
• Acidizing techniques for carbonate formations
• Sandstone acidizing
• Potential safety hazard in acidizing

Hydraulic Fracturing

• Introduction
• Mechanics of fracturing
• Production increase from fracturing
• Propping the fracture
• Frac fluids
• Frac job design
• Frac job evaluation techniques

Scale Deposition, Removal and Prevention

• Introduction
• Causes of scale deposition
• Prediction and identification of scale
• Scale removal
• Scale prevention

Corrosion Control

• The corrosion process
• Detection and measurement of corrosion
• Corrosion control

Workover and Completion Rigs Workover System

• Conventional production rigs
• Non-conventional workover system
• Concentric tubing workover

Workover Planning

• Reasons for workover
• Workover  to alleviate formation damage
• Workover  for low permeability well
• Workover  of wells in partially pressure-depleted reservoirs
• Workover  to reduces water production in oil and gas wells
• Workover  to reduces gas production in oil wells
• Workover  for sand control
• Workover  to repair mechanical failure
• Workover  to change zones or reservoir
• Workover  to multicomplete
• Workover  to increase production in well producing high viscosity (low gravity) oil
• Workover economics

PESERTA YANG DIREKOMENDASIKAN

Latar belakang: Operator/Sr. Operator/Engineer/Non-engineer

INSTRUKTUR

Team Konsultan PT Ganesha Inti Persada

WAKTU PELAKSANAAN

3 Hari (dimulai pukul: 09.00-16.00)

INVESTASI (Tidak termasuk biaya akomodasi & penginapan)

• Rp. 11.000.000, - / peserta (Jakarta)
• Rp. 11.000.000, - / peserta (Bandung)
• Rp. 12.000.000, - / peserta (Yogyakarta)
• Rp. 14.000.000, - / peserta (Bali)
• Rp. 14.750.000, - / peserta (Lombok, Batam, Makasar)
• US$ 4780 / peserta (Malaysia)

FASILITAS

Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang

INFO & PROMO

081296791324 (WA)

021-22830080

CONTACT PERSON

0811-996-1224 (WA)

0812-9679-1324 (WA)

JADWAL TRAINING TAHUN 2024 :

April

• 24-26 April 2024, Bandung

Mei

• 6-8 Mei 2024, Bali/ Yogyakarta
• 15-17 Mei 2024, Semarang
• 22-24 Mei 2024, Lombok/ Bandung
• 28-30 Mei 2024, Jakarta

Juni

• 5-7 Juni 2024, Malang
• 12-14 Juni 2024, Surabaya
• 19-21 Juni 2024, Medan/ Jakarta
• 26-28 Juni 2024, Yogyakarta

Juli

• 3-5 Juli 2024, Bandung
• 10-12 Juli 2024, Palembang
• 17-19 Juli 2024, Medan/Yogyakarta
• 24-26 Juli 2024, Malang
• 29-31 Juli 2024, Jakarta

Agustus

• 7-9 Agustus 2024, Yogyakarta
• 14-16 Agustus 2024, Lombok/ Jakarta
• 21-23 Agustus 2024, Batam/ Bandung
• 28-30 Agustus 2024, Malang

September

• 4-6 September 2024, Jakarta
• 11-13 September 2024, Malang
• 18-20 September 2024, Surabaya/ Bandung
• 25-27 September 2024, Yogyakarta

Oktober

• 9-11 Oktober 2024, Jakarta
• 16-18 Oktober 2024, Batam
• 23-25 Oktober 2024, Bandung
• 28-30 Oktober 2024, Surabaya

November

• 6-8 November 2024, Lombok/ Jakarta
• 13-15 November 2024, Bali
• 20-22 November 2024, Surabaya
• 27-29 November 2024, Yogyakarta

Desember

• 4-6 Desember 2024, Bandung
• 11-13 Desember 2024, Medan/ Jakarta
• 18-20 Desember 2024, Makassar/ Yogyakarta

Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.