Production Operation Management for Manager
OBJECTIVES
After participate in this course, the participants will be able to:
- Understand the basic concept of oil and gas handling processes and facilities and how to operate this technology in field application.
- Understand the basic concept of oil and gas handling processes and facilities and how to operate this technology in field application.
- Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
- Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.
AUDIENCE
No specified (operator, senior operator, engineer, non engineer)
MATERI
Geologic Considerations in Producing Operation
- Introduction
- Sandstone reservoirs
- Geologic factors affecting reservoir properties in sandstone
- Application of geologic concepts in specific sandstone
- Carbonate reservoir
- Application of geologic concept in carbonate reservoirs
Reservoir Consideration in Well Completions
- Introduction
- Hydrocarbon properties of oil and gas
- Recommendations of obtaining good test data
- Eyeball interpretation of pressure charts
Primary Cementing
- Introduction
- Cementing materials
- Cement additives
- Cement bonding
- Flow properties of primary cements
- Displacement mechanics
- Cost of primary cementing
- Special problem situations-new developments
- Primary cementing practices
Well Completion Design
- Factors influencing well completion design
- Conventional tubular configuration
- Unconventional tubular configurations
- Sizing production tubular
- Completion interval
- Permanent well completion (PWC)
- Tubingless completion
Tubing Strings, Packers, Subsurface Control Equipment
- Tubing strings
- Steel grades
- Tubing connections
- Makeup of API threaded connection
- Design of tubing strings
- High strength tubing
- Physical properties of steel
- Sensitivities of high strength tubing
- Tubing inspection
- Tubing handling practices
- Equipment for use with-strength tubing
- Tubing running practices
- API publication list
- Packers and subsurface control equipment
- Production packers
- Subsurface control equipment
Perforating Oil and Gas Wells
- Introduction
- Types of perforator
- Evaluation of perforator performance
- Factors affecting gun perforating result
- Perforating in a clean fluid with differential pressure into wellbore
- A comparison between the GEO-VANN system and other perforating methods in wells equipped with packers
Completion and Workover Fluids
- Functions-requirements-selection criteria
- Formation damage related to solids
- Oil-fluids-practical application
- Conventional water-base mud
- Oil base or invert-emulsion muds
- Foam
- Perforating fluids
- Packer fluids
- Well killing
Through-Tubing Production Logging
- Introduction
- Logging device
- Application of through-tubing production logging
- Field examples of production logging techniques
- Primary cement evaluation
Problem Well Analysis
- Problem wells
- Problem well analysis checklist
Paraffin and Asphaltene
- Introduction
- Paraffin and asphaltene chemistry
- Deposition mechanisms
- Removal of wax deposits
- Preventing or decreasing wax deposition
- Design of wax control
Squeeze Cementing-Remedial Cementing
- Introduction
- Theoretical considerations
- Practical considerations
- Special squeeze cementing situations
- Planning a squeeze cement job
- Normal operational procedures
- Other operational procedures
- Plug-back operations
- Special cement system
Sand Control
- Introduction
- Reduction of drag force
- Mechanical methods of sand control
- Practical considerations in gravel packing
- Use of screen without gravel
- Resin consolidation methods
Formation Damage
- Introduction
- Basic causes of damage
- Classification of damage mechanisms
- Reduced absolute permeability
- Increased fluid viscosity (emulsion)
- Diagnosis of formation damage
Surfactants for Well Treatments
- Characteristics of surfactants
- Use and action of surfactant
- Formation damage susceptible to surfactant treatment
- Preventing or removing damage
- Well stimulation with surfactants
- Increasing effectiveness of rod pumping
- Prevention of well damage
Acidizing
- Acid used in well stimulation
- Acid additives
- Carbonate acidizing
- Acidizing techniques for carbonate formations
- Sandstone acidizing
- Potential hazard in acidizing
Hydraulic Fracturing
- Introduction
- Mechanics of fracturing
- Production increase from fracturing
- Propping the fracture
- Frac fluids
- Frac job design
- Frac job evaluation techniques
Scale Deposition, Removal and Prevention
- Introduction
- Causes of scale deposition
- Prediction and identification of scale
- Scale removal
- Scale prevention
Corrosion Control
- The corrosion process
- Detection and measurement of corrosion
- Corrosion control
INSTRUKTUR
Team Konsultan PT Ganesha Inti Persada
WAKTU PELAKSANAAN
3 Hari (dimulai pukul: 09.00-16.00)
INVESTASI (Tidak termasuk biaya akomodasi & penginapan)
- Rp. 11.000.000, - / peserta (Jakarta,bogor)
- Rp. 11.000.000, - / peserta (Bandung)
- Rp. 12.000.000, - / peserta (Yogyakarta,Surabaya,)
- Rp. 14.000.000, - / peserta (Bali)
- Rp. 14.750.000, - / peserta (Lombok,batam ,Makasar)
- US$ 4780 / peserta (Malaysia)
FASILITAS
Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang
INFO & PROMO
0811-996-1224 (WA)
021-22830080
CONTACT PERSON
0812-9679-1324 (WA)
JADWAL TRAINING TAHUN 2024 :
April
- 24-26 April 2024, Bandung
Mei
- 6-8 Mei 2024, Bali/ Yogyakarta
- 15-17 Mei 2024, Semarang
- 22-24 Mei 2024, Lombok/ Bandung
- 28-30 Mei 2024, Jakarta
Juni
- 5-7 Juni 2024, Malang
- 12-14 Juni 2024, Surabaya
- 19-21 Juni 2024, Medan/ Jakarta
- 26-28 Juni 2024, Yogyakarta
Juli
- 3-5 Juli 2024, Bandung
- 10-12 Juli 2024, Palembang
- 17-19 Juli 2024, Medan/Yogyakarta
- 24-26 Juli 2024, Malang
- 29-31 Juli 2024, Jakarta
Agustus
- 7-9 Agustus 2024, Yogyakarta
- 14-16 Agustus 2024, Lombok/ Jakarta
- 21-23 Agustus 2024, Batam/ Bandung
- 28-30 Agustus 2024, Malang
September
- 4-6 September 2024, Jakarta
- 11-13 September 2024, Malang
- 18-20 September 2024, Surabaya/ Bandung
- 25-27 September 2024, Yogyakarta
Oktober
- 9-11 Oktober 2024, Jakarta
- 16-18 Oktober 2024, Batam
- 23-25 Oktober 2024, Bandung
- 28-30 Oktober 2024, Surabaya
November
- 6-8 November 2024, Lombok/ Jakarta
- 13-15 November 2024, Bali
- 20-22 November 2024, Surabaya
- 27-29 November 2024, Yogyakarta
Desember
- 4-6 Desember 2024, Bandung
- 11-13 Desember 2024, Medan/ Jakarta
- 18-20 Desember 2024, Makassar/ Yogyakarta
Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP
Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.).
